Once you’ve confirmed that your RD-8 requires updating, you can begin the update process. You’ll need to connect your device to the computer, download the firmware file on the RD-8 download page, and then perform the update.
[mai mult...]How to update the firmware on the Behringer X32 P.C./Mac
Before updating the firmware on the X32, make sure the USB thumb drive is formatted as FAT32. Formatting will erase all contents stored on the drive. Be sure that you back up any data on your drive before formatting. Follow the instructions below to perform the firmware update.
[mai mult...]Zoom R Series on P.C.
Register the R Series with Zoom
The first thing you’ll want to do when you open the box is to register R Series with Zoom and activate Cubase LE. To register the R Series with Zoom, you’ll need the serial number located on the bottom. You’ll also need to create an account with Steinberg and activate the bundled software. Follow the steps below to register for the Zoom R Series and activate your software.
[mai mult...]Zoom H1n on P.C.
Recording to a computer
The great thing is that not only is this great for capturing audio on the fly, but you can also use it as an audio interface. This means you can record meetings, podcasts, and anything else with it connected to your computer! It’s class-compliant on Mac which means no additional drivers are necessary. Windows users will need to download the H1n’s dedicated ASIO driver for it to communicate correctly.
[mai mult...]Behringer WING on P.C.
You can connect WING directly to your computer via the USB-B port on the back of the mixer (preferably direct, not to a USB hub). Once connected you can stream up to 48 channels of USB audio, both to and from your computer. This is useful if you want to record the WING audio directly to your computer or play audio from a DAW session to WING (or both at the same time!).
WING supports up to 48 channels of USB audio input and output streaming, but you can also reconfigure it to stream either 2, 8, 16, or 32 channels from the Setup menu. The sample rate can only be set to 44.1kHz or 48kHz, so make sure your DAW settings are configured the same.
[mai mult...]Alesis Strike how to register the module on P.C.
Before we get started, the first thing you will need to do is register the Strike kit with Alesis. When you register the device, you’ll gain access to software downloads and a coupon code for 40 free drum lessons from Melodics.
[mai mult...]Moog Matriarch Firmware Update P.C./Mac
Moog will periodically release firmware updates that add new features, bug fixes, and optimizations to Matriarch’s internal software. The firmware update will require you to transfer SysEx files using software on your OS. We recommend using MIDI-OX on PC-based systems and SysEx Librarian for Mac computers.
[mai mult...]Moog Sub Phatty Update the firmware
The next step in the process is to transfer the newly extracted firmware file to your Sub Phatty. Inside of the Sub Phatty’s firmware folder you just downloaded and extracted, you will see two firmware update subfolders: Firmware Automatic Update and Firmware Manual Update. While the Automatic Update is the fastest and simplest method to perform the update, both Moog and we highly recommend using the Manual Update method as the Automatic Update may result in more errors.
[mai mult...]Moog Sub Phatty download the firmware file P.C./Mac
Updating the Moog Sub Phatty’s firmware is not only for new features and bugfixes, but it’s a great step in the troubleshooting process. For example, if you’re not getting any sound output from the Sub Phatty, a firmware update could solve the issue. The first step in the process is to download the firmware update from Moog’s website.
[mai mult...]Digitech TRIO on P.C./Mac
Updating the firmware on your Digitech TRIO is easy. To begin, click here and download the latest version of the TRIO Updater from the right-hand side of the page. Once the download is complete, install the updater application and proceed with the instructions below.
[mai mult...]