Behringer WING on P.C.

Configurare noua (How To)

Situatie

You can connect WING directly to your computer via the USB-B port on the back of the mixer (preferably direct, not to a USB hub). Once connected you can stream up to 48 channels of USB audio, both to and from your computer. This is useful if you want to record the WING audio directly to your computer or play audio from a DAW session to WING (or both at the same time!).

WING supports up to 48 channels of USB audio input and output streaming, but you can also reconfigure it to stream either 2, 8, 16, or 32 channels from the Setup menu. The sample rate can only be set to 44.1kHz or 48kHz, so make sure your DAW settings are configured the same.

Solutie

1. Press the Routing menu button and select the inputs icon (right of the SD icons).

2. Press the Source Group drop-down menu and select USB Audio to see its available sources.

3. Select a USB source to set it up:

4. Press Customize to name it and select an icon.

5. Press Tags to add tags to your source (IDs) for recall ability and mute grouping.

6. Choose a Mono, Stereo, or Mid/Side configuration.

7. Configure all your sources and start mixing.

Tip solutie

Permanent

Voteaza

(4 din 8 persoane apreciaza acest articol)

Despre Autor

Leave A Comment?