Situatie
When you experience “ERR_ADDRESS_UNREACHABLE” errors, restarting your router often resolves them. There are many cases in which the router enters error mode, and network devices will likely experience this issue in the future. Restarting your router will resolve this error message. Here is what you need to do:
1: Ensure you have disconnected your router or modem from its power source. Don’t simply turn it off.
2: You should wait approximately 15 to 20 seconds before reconnecting the device.
3: You’ll have to wait for the device to reopen.
You can try other options when you can’t fix the problem and the error message still appears. Alternatively, you may reset your router, which may be a good solution. Before you do this, ensure you know the method your ISP uses to enable your router to function.
1: Locate the reset tag in the small hole on the back of your router.
2: Insert a small pin continuously into the hole for 4-5 seconds. Once this activity has been completed, you must reset your router.
3: You can obtain its address once connected to the router with an Ethernet cable, and you will probably find this address on the back.
4: Enter your Internet Service Provider’s information once complete.
5: Now that the error message is gone, you can check if the problem is fixed.
Allow or Disallow Proxy Access
Windows users can also resolve this error without any hassle. If you receive an ERR_ADDRESS_UNREACHABLE message, it may be due to incorrect proxy settings. You must check your proxy settings to resolve the issue if this is the case. Here’s how to fix it.
1: The first step is to press the Windows key and select the Settings icon to access the Windows Settings page.
2: Next, click on the first result that appears when you search for Internet Options.
3: Click on the Connections tab within the Internet Properties window, and then click on LAN settings. Remove the check mark next to Use a proxy server for your LAN.
4: Then, click OK. Then, click Apply and restart your computer.
5 Ensure that your problem has been resolved by restarting Chrome.
The error may be fixed by adjusting your proxy settings, but if not, please proceed to the next possible solution below.
Check Address
This is another way to clear the error message ERR_ADDRESS_UNREACHABLE. Occasionally, you may receive an error message if you attempt to access a private address through a public network. For reg, 192.168.1.8 is considered a private address, so only private networks can access it.
If the network is secure, ensure that the network does not bind the address you wish to access. Connect to the correct network and then attempt to reaccess the address.
You can resolve the error by checking the address you are trying to access, but if you still experience difficulties, you can contact your Internet Service Provider (ISP).
Clear Google Chrome DNS Cache
You can fix the ERR_ADDRESS_UNREACHABLE message by clearing Chrome’s DNS cache. The solution is easy to implement and does not require much time.
Here are the steps to follow.
1: Open the Google Chrome browser.
2: Enter Chrome://net-internals/#dns into your browser’s address bar and press Enter.
3: Clear the host cache by clicking the button.
4: Try to reopen the website after clearing Chrome’s cache, then check if the problem has been resolved.
Reset the TCP/IP Protocol
When all the solutions above have failed to fix the problem, you can attempt to reset TCP/IP using the Command Prompt. This solution has been successful in fixing ERR_ADDRESS_UNREACHABLE errors. Here are some instructions for resetting TCP/IP quickly.
1: Click the Windows logo key + R simultaneously to open the Run dialog box.
2: Type cmd and press Shift + Ctrl + Enter to open Command Prompt as an administrator. If you make bad choices with the Command Prompt, your PC may crash, and there’s even a chance of losing some important stuff. Thus, it’s best to use the command prompt carefully.
3: Please type the following commands one at a time and press Enter after each one.
ipconfig /release
ipconfig /all
ipconfig /flushdns
ipconfig /renew
netsh int ip set dns
netsh Winsock reset
4: After entering the commands, close the Command Prompt and restart your computer.
5: Restart your computer and see if it’s fixed.
You can try these additional tips instead of the ones above:
If your browser isn’t working, try another one. You can get to the website with another one and reinstall or reset it if yours doesn’t work.
It might help if you try another ISP and network. If you can’t access the website, try visiting it in incognito. By doing this, you’ll be able to figure out if your browser add-ons are causing the error. You can also access it from another device on the same network, and you’ll then be able to determine if your device or your network causes the error.
Leave A Comment?