Switch#
Switch#
Switch#
Switch#
Switch#
Switch#en
Switch#conf
Switch#configure t
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#ser
Switch(config)#service en
Switch(config)#service pass
Switch(config)#service password-encryption
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#
Switch(config)#exit
Switch#
%SYS-5-CONFIG_I: Configured from console by console
Switch>
Switch>en
Switch#cof
Switch#conf
Switch#configure t
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#ena
Switch(config)#enable sec
Switch(config)#enable secret test
Switch(config)#end
Switch#
%SYS-5-CONFIG_I: Configured from console by console
Switch#show runn
Switch#show running-config
Building configuration…
Current configuration : 1129 bytes
!
version 15.0
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Switch
!
enable secret 5 $1$mERr$126VWMuSfhXn9GAlqkjPo/
!
!
!
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
interface FastEthernet0/1
1. Accesam bitdefender.com si ne logam pe contul nostru de Central Bitdefender (daca e pentru prima data va fi nevoie sa ne inregistram)
2.Selectam My Devices din meniul lateral din stânga paginii.
3. In bara de My Devices apasam pe Add device
4. In fereastra deschisa alegem Security, apoi selectam This device pentru a incepe descarcarea programului:
5. Asteptam sa se termine descarcarea, apoi rulam kit-ul de instalare.
ENABLE SECRET PASSWORD
Router>en
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#enable sec
Router(config)#enable secret cisco1234
Router(config)#service pass
Router(config)#service password-encryption
Router(config)#end
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#sh run
Building configuration…
Current configuration : 737 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
service password-encryption
!
hostname Router
!
!
!
enable secret 5 $1$mERr$WKkcGROjDgUmPKrVvqyr10
Type the following command and hit enter: netsh.exe winhttp show proxy
On Windows 10: Type cmd in the Type here to search field on the taskbar, right-click on it and select the option Run as administrator.
In the Command Prompt window, type netsh winhttp, reset proxy and press the enter key.
Move to global configuration mode, like this:
Move to interface configuration mode. In our example, let’s assign an a description to the Fa0/1 interface:
To view the interface’s description, press Ctrl-Z to exit back to privileged mode then type:
Move to global configuration mode, like this
Move to interface configuration mode. In our example, let’s assign an a description to the GI0/0/0 interface:
Use the description command with the description you define for this interface. Here is an example:
