Soluții

How to setup Tenda Range extender universal wireless N300,A9

• Data 15/05/2025
• Autor Mihai Retezan
• 3
• 1954

Here’s a step-by-step guide to help you set up a Tenda N300 Universal Wireless Range Extender:

       What You Need:

• A Tenda N300 wireless range extender
• Your main Wi-Fi network name (SSID) and password
• A smartphone, tablet, or laptop with Wi-Fi

    Setup Method 1: WPS Button (Fastest)

Use this if your router has a WPS button.

1. Plug the Tenda N300 into a power outlet near your main router
2. Wait for the Power LED to turn solid
3. Press the WPS button on your router (usually for 2–3 seconds)
4. Within 2 minutes, press the WPS button on the Tenda extender
5. The Signal LED on the extender will blink and then become solid, indicating a successful connection
6. Once connected, you can move the extender midway between your router and weak signal area.

    Setup Method 2: Web Interface (Manual Setup)

Step 1: Connect to the Extender

• Plug in the extender near your router
• On your phone or laptop, connect to the Wi-Fi named something like:
  Tenda_EXT or Tenda_XXXX

Step 2: Access Setup Page

• Open a browser and go to:
  http://192.168.0.254
  (or sometimes http://tendawifi.com)

Step 3: Start the Setup Wizard

• It will automatically scan for nearby Wi-Fi networks.
• Select your main Wi-Fi from the list.
• Enter your Wi-Fi password when prompted.

Step 4: Set Extended Network Name

• Choose whether to keep the same SSID (recommended for seamless roaming)
  or create a new one like YourNetwork_EXT.

Step 5: Finish Setup

• Save/apply the settings
• The extender will reboot and connect to your main Wi-Fi
• Move it to a location where the signal LED is green or yellow (not red — that’s too far).

      Tips:

• Place the extender midway between your router and the dead zone
• Avoid placing it behind thick walls or metal objects
• If you lose connection, reset the extender using the reset hole (press with a pin for 10 seconds).