Soluții pentru problemele tale IT
Action Center is missing from your Windows 10 taskbar and that can make things a little difficult. You can miss some important notifications related to update, sync, or new available downloads from Microsoft Store.
[mai mult...]
If you’re planning on selling your Kwikset Kevo, or just moving to another house and don’t plan to take it along with you, here’s how to factory reset it so your digital keys are completely erased from it. Unfortunately, the process isn’t as obvious as Kwikset could have made it, since none of the buttons on the lock say “reset”, and there’s no way to reset the lock from the app. Luckily, we’re here to help (and it literally just takes 10 seconds).
Start by removing the black assembly cover by pushing it upward and sliding it out.
Locate the small button labeled “A”. It will be near the top-left corner of the lock.
Press and hold this button for about ten seconds until you hear the lock beep and the lights on the outside portion of the lock flash red.
Once this happens, release the button and you’ll be good to go! The Kevo is now ready for its new owner. Again, this will completely erase all of your current digital keys, as well as any fobs that you have connected to it. So make sure that you reset the lock after you’re positive that you won’t use it anymore.
[mai mult...]
Depending on how you have Nest’s Home/Away Assist feature set up, you might be receiving notifications to set you alarm even if you’re still home.
Start off by tapping the Settings button (the gear icon) in the top right corner of the main screen.
On the “Home” page, select the “Home/Away Assist” setting.
Next, tap the “What Decides If You’re Home” setting.
As you can see, our example phone’s location is not being used to determine whether “Home” or “Away” gets enabled. To change this, tap the “Use Phone Location” option.
And then turn on the toggle switch that appears. The Nest app will now switch to “Home” or “Away” status based on your phone’s GPS location.
You can also tap each individual sensor listed for your Nest Secure system and either include or exclude it from Home/Away Assist. If you disable everything, you’ll need to manually switch to “Home” or “Away” in the Nest app to set your status.
When you’ve set all that up, go back and tap the “Security” setting under the “When You Are Away” section of the main “Home/Away Assist” page.
The toggle switch at the top lets you determine whether or not the Nest app automatically arms or disarms your Nest Secure system when you set your status “Away” or “Home.”
Below that, you can choose the security level to associate with the “Home” and “Away” statuses.
Finally, the “Remind Me” lets your Nest send you a notification reminding you to arm your Nest Secure system when the Nest app detects that you’re not at home. This is the notification pictured at the very top of the article, only this time those notifications will work properly, since we’ve fixed the Home/Away Assist issue.
With a Nest Tag, it’s really easy to manually arm and disarm your Nest Secure system, so disabling Home/Away Assist entirely isn’t a bad idea. However, if you are a big fan of complete automation, these are the settings you’ll want to customize and mess around with.
[mai mult...]Apps you install on Android often collect data about you and your activity for the app developers and their affiliates. With a tool developed at the University of Oxford, you can see those trackers and even stop them in their tracks.
At the very least, most Android apps are collecting data on crashes and bugs for the app developers to review. Apps may also use trackers in order to function, especially if the app has a social aspect, like to fetch content from external domains. The developers may also want to understand how people use their app so they can fine-tune the user experience. Trackers that report directly to the app’s owner are usually referred to as “first-party” trackers and are, in theory, the safer kind.
“Third-party” trackers, however, send data to external services the company uses, or to the company’s business partners. These are often advertisers wanting to sell stuff to you. They’re likely using your data to do things like learning what your interests are, or judging what time of day you’re likely to tap on ads. You can limit trackers’ knowledge of you by opting out of personalized ads, but that doesn’t stop them from learning what they can.
If all of this has you concerned, then meet TrackerControl, a free and open-source app capable of identifying those trackers and blocking them as well. It works by piping your network data through an on-device VPN server and checking the traffic against a database of known trackers. If you’re worried by the privacy concerns associated with VPNs, don’t be; it’s not a true VPN and is located on your device, not a remote server. Unfortunately, this does mean you can’t use a regular VPN while TrackerControl is working.
With the traffic analyzed, you can then see the websites that your data is bound for, and, with the full version, even the country where they’re located. The app relies on IP addresses to do this, however, which aren’t necessarily accurate.
TrackerControl is also capable of blocking these trackers, but that feature comes with two caveats. First, the only version available in the Play Store is the “Slim” version that abides by Google’s rules by stripping out the blocking feature. To get real power over trackers, you’ll need to sideload the full app after downloading the APK from the TrackerControl website. Alternatively, you can install it using the third-party app store F-Droid (which itself you’ll have to sideload).
The second caveat is that blocking trackers can and often does prevent apps from working properly. Typically, this looks like loading screens that never complete. In our testing, web browsers and social media apps almost always have this issue, since they’re often fetching media to serve you from outside domains. You can solve the problem by allowing trackers necessary for function while still blocking others, although this involves some trial and error.
The first time you launch TrackerControl, tap the toggle switch in the top-left corner of the app to begin monitoring.
Warning: Enabling TrackerControl, especially the full version, will almost certainly lead to apps not working. Proceed with caution if you rely on your apps for important things like work or finances, and be prepared to tune the settings. Balancing privacy and functionality is often possible, but not necessarily easy.
You’ll be prompted to allow the app permission to set up its VPN server. Tap “Ok.”
You should see a small key icon appear in the status bar signifying the VPN is operational, and TrackerControl’s rocket icon should also appear in your notifications.
With TrackerControl activated, launch any app you want to monitor. Then go back to TrackerControl and look for the app in the main menu. Tap it, and under “Tracker Libraries” you’ll see a summary of the companies and services collecting data through the app. Scroll down, and you’ll see individual trackers divided by category, like Essential, Analytics, Fingerprinting, and Social. You’ll also see how long ago your data was sent.
Feel free to search for information on the different trackers by looking up their names on the internet. Note that this list will likely grow as you continue to use the app.
If you’re using the Slim edition and are uncomfortable with the trackers, you can stop them by flipping the “Internet Access” switch to the off position. However, the app will not work as long as TrackerControl is operational, or at least won’t be able to do anything that involves the internet.
It’s a rather blunt tool, and you’re probably better off simply uninstalling the offending app to protect your privacy.
If you installed the full version of TrackerControl, you have more granular control; you can block and allow trackers by category. By default, all non-essential categories will be blocked. You can choose to block trackers in the Essential category as well, but we don’t recommend this because it will almost certainly lead to problems.
If you’re having issues using an app while TrackerControl is working, try toggling blockers off. Start by making sure the Essential trackers for the app are unblocked, then consider allowing Social and Analytics trackers. If you’re still not able to do what you want, you might want to simply allow all of the app’s trackers by toggling off the “Monitoring” option.
Alternatively, you can unblock individual trackers by tapping them inside their categories. We don’t recommend this, though, because ensuring you unblocked the correct ones can require a lot of testing. And even if you succeed, other trackers may later become active, which TrackerControl will automatically block, forcing you to go through the process again.
If lack of functionality has you frustrated, TrackerControl also shows a persistent notification with the option to “Pause for 10 Mins.” Pull down on the status bar to access it. This button switches off all monitoring and blocking for 10 minutes while you do what you’re trying to accomplish. Note that this will allow all running apps to do their tracking business.
If you need more than 10 minutes, you can disable TrackerControl entirely by again hitting the toggle button in the top-left corner of the main menu.
[mai mult...]BIOS/UEFI vă permite să controlați lucruri precum ordinea de pornire, hardware-ul conectat, viteza ventilatoarelor, luminile fizice de pe computer și ora sistemului. Plăcile de bază moderne vă permit chiar și să faceți undervolt și overclock pentru procesorul dumneavoastră! Este un lucru puternic.
UEFI este practic noul BIOS, care îndeplinește aceeași sarcină, dar mai bine. Cu UEFI, obțineți timpi de pornire mai rapizi (aparent), capacități mai mari ale unităților, metode de actualizare și suport pentru drivere mai bune și un mod pe 64 de biți (în timp ce BIOS este doar pe 16 biți).
Cu alte cuvinte, trecerea la UEFI este un mic upgrade și merită făcută. Rețineți că până și computerele moderne (inclusiv Windows 11) tind să numească în continuare BIOS software-ul plăcii de bază, chiar dacă, din punct de vedere tehnic, este UEFI. Nu vor exista pierderi de date în timpul conversiei BIOS-ului tradițional în UEFI. Cu toate acestea, ca măsură de precauție, vă rugăm să faceți o copie de rezervă a sistemului dumneavoastră.
Ar trebui să folosiți Windows 10 v1703 sau o versiune mai recentă. Dacă nu sunteți sigur, apăsați Win + R, tastați winver și apăsați Enter. Pe a doua linie, ar trebui să vedeți “versiunea 1703” sau mai mare.
To make an account on Yahoo, you’ll need an active internet connection and a mobile phone with texting capabilities. Be prepared to enter some identifying information as well, like your first name, last name, and date of birth.
[mai mult...]