Soluții

How to use your internet service during a power outage

Use a portable power station

A power station is effectively a giant portable battery that can output enough power to keep anything powered, from your phone and computer to a fridge and freezer. They’re looked upon as the gold standard of home backup power. Most of them have lithium-ion (Li-ion) or lithium iron phosphate (LFP) batteries inside them, and some can have their capacity expanded with additional battery packs.

These chargers commonly feature both AC and DC plug sockets plus USB power. Their capacity is typically measured in Watt-hours (Wh), where 1000Wh would theoretically keep a 1000W device running for an hour. Of course, your router will use far less power than this, likely falling somewhere in the 30W range.

Power stations are great for emergencies like power outages, as long as you store them in a (somewhat) charged state. Keeping a lithium-ion battery in storage at full charge is not recommended for long-term battery health, so limiting the charge to around 80% or less is recommended.

To use a power station as a backup for your internet connection, you’ll need to ensure that your network equipment can easily be plugged in (including a separate router or network termination device, should you have one). You’ll also need enough power outlets to keep these devices plugged in and to ensure the combined wattage of the devices you want to power doesn’t exceed the capabilities of your power station.

There are more practical things to keep in mind, like the location of your network equipment in relation to other devices you want to keep powered (like your fridge or microwave oven). Power stations are billed as portable devices, which means they often include handles or wheels, but the larger the capacity, the more they weigh. A few long extension cords might be a good idea.

A power station is arguably the most versatile solution for this task, since you can use it to power all manner of items, take it camping, bring it out on the patio to power laptops or stereo systems, or throw it in your car for power on road trips. The most important thing about relying on a power station for emergencies is remembering to charge it!

We’ve covered power stations extensively at How-To Geek, including popular models like the Anker SOLIX C1000 and the Bluetti AC200L. Check out our full list of recommended power stations as well as some things you might want to know before navigating unplanned outages and the benefits of solar power stations for extended downtime.

Brand Anker
Dimensions 14.8×8.07×10.5 in
Weight 28.4 lb
AC Output ports Six / 1800W Pure Sine Wave (2400W Surge)
AC Input rating 1300W
DC Output ports 120W, 12V/10A

The new Anker SOLIX C1000 is a compact yet powerful 1800W portable power station. It packs 11 different ports, 2400W AC power surge, built-in lighting, and more. Charge all your gear or be prepared for an emergency.

Brand Bluetti
Dimensions 16.5 x 11 x 14.4in
Weight 62.4lbs
AC Output ports 4 x 120V/20A & 1 x 120V/30A
AC Input rating 2,400W
DC Output ports 1 x 48VDC/8A RV & 1 x 12V/10A Car outlets

The Bluetti AC200L Portable Power Station is a worthy successor to the AC200MAX, delivering ample power through AC, DC, and USB ports. The 2,048mAh capacity battery makes the AC200L keep the essentials and outdoor supplies running for hours

Get an uninterruptible power supply

Uninterruptible power supplies, or UPS for short, are nothing new. They’ve been around for decades and are frequently relied upon in the tech world to keep computers and network equipment online during power outages. As the name implies, a UPS is designed to keep your devices running even when power is interrupted.

“Interrupted” is the key word here, since there are different types of UPS that you’ll need to choose from depending on your needs and budget. Some are designed with power dips (where power may not be lost completely) and brownouts in mind, offering a very short backup period. Others are designed for use with low-power devices (like routers and network-attached storage). Then there are the large, pricey options that are designed to keep computers running even when power is cut.

Unlike a power station, which works best as an emergency solution that you charge and forget about, a UPS typically sits in between whatever you want to keep powered and the wall. When the power goes down, the UPS takes over. How effective this is depends on what type of UPS you opt for and how much you’re prepared to spend.

Buying the right kind of UPS for your situation is important. Some are designed to give you enough time to safely finish what you’re doing without losing work, so you can shut down your computer safely. Others are designed to keep equipment running for far longer.

Many consumer UPS units use cheaper lead-acid batteries, while also being far more limited in terms of their intended use. On the upside, this makes them cheaper “set and forget” solutions that you don’t need to manage, store, or keep charged.

[mai mult...]

How to add almost any speaker to Home Assistant

Smart speakers aren’t the only speakers in your home that you can connect to Home Assistant. You should be able to connect most speakers on your home network, and even dumb speakers can be connected with a little help.

One of the most powerful features of Home Assistant is the huge number of ingrations that allow you to connect a staggering number of devices and services. Many of these integrations have been contributed by the community. There are multiple dedicated integrations that you can use to connect and control speakers.

For example, there are integrations for speakers from Sonos, Denon, Bose, Bang & Olufsen, and more. You can use these integrations to play music on these devices, with some integrations allowing for local control without the need to connect via cloud services.

There are also some more generic integrations that allow you to connect speakers that support different streaming protocols. There’s a Google Cast integration for smart speakers and Chromecast devices, and the SlimProto integration lets you control Squeezebox music players from Home Assistant.

  • Use Music Assistant

Connect using a wide range of options

Perhaps the easiest way to add almost any network-connected speaker to Home Assistant is to use the Music Assistant app (the new name for add-ons). This is a powerful music hub application that integrates with Home Assistant and allows you to unify your music streaming services and local audio files into a single music interface. You can play a playlist where one song is from Apple Music, the next from your local audio files, and the next from Spotify as if they were all from the same service.

Music Assistant also allows you to connect speakers using multiple integrations. These are called player providers and offer support for Sonos, AirPlay, Snapcast, Squeezelite, DLNA/UPnP, MusicCast, Bluesound, and more. Using the player providers, you can connect a huge array of different speakers and stream music to them directly from Music Assistant.

If you want the most seamless way to play music to different types of speakers around your home, Music Assistant is probably the best solution. You can even create synced speaker groups for whole-home audio, although the sync works best when all the speakers use the same ecosystem.

  • DLNA and AirPlay

Network streaming old and new

Many modern speakers support AirPlay, and the easiest way to add AirPlay speakers is in Music Assistant. Even if you don’t use the Music Assistant app itself for playback, adding an AirPlay speaker exposes that speaker to the rest of Home Assistant, too. There are other options, but they’re often more complicated; you can connect AirPlay speakers via Music Assistant in just a few clicks.

If you have older speakers, AirPlay may not be an option without an additional adapter. In that case, you may be able to fall back on an older network streaming protocol. DLNA/UPnP was a common standard in the early 2000s before proprietary systems such as AirPlay and Google Cast came along.

If your speaker supports DLNA, you should be able to connect it to Home Assistant, meaning you can use older equipment such as Hi-Fi systems and enjoy the high-quality sound that they can provide, rather than relying on small smart speakers. There’s a dedicated DLNA Digital Media Renderer integration you can use, or (are you spotting the pattern yet?) you can add DLNA speakers using Music Assistant, which has a dedicated DLNA/UPnP player provider. I have the old micro Hi-Fi system my dad passed on to me connected via DLNA, and it sounds stunning.

  • Connect dumb speakers

A streamer makes a dumb speaker smart

Not every speaker in your house may be able to connect to your home network, especially if you have older speakers. That doesn’t mean you can’t still connect them to Home Assistant, however.

All you need to do is connect a small streaming device to your speakers via the available inputs, such as RCA, AUX, or optical. You can then stream audio to the streaming device, which will play through the connected speakers.

There are plenty of options for streaming devices. You can use a Raspberry Pi with a DAC HAT or buy a dedicated streaming device such as a WiiM Mini. You can build your own ESP32-based streamer, or purchase one ready-made, such as the HiFi-ESP32. You could even use an old Android phone and install a Snapcast or Squeezelite app, and stream directly to the phone.

[mai mult...]