Situatie

TP-Link WN722N is a budget-friendly Wi-Fi adapter with Monitor&Packet injection capabilities for pen-testing enthusiasts, but if you don’t install the correct drivers you would not have acces to these tools.

Bellow are the steps to clean-install the correct drivers.

Step1:- Open Terminal and run update command.

sudo apt update

Step2:- Now run upgrade command.

sudo apt upgrade -y

Step3:- Now run the command to install the drivers.

sudo apt install realtek-rtl8188eus*

Step4:- Now run the following command to enable monitor mode.

sudo airmon-ng start wlan0

Step5:- Lets check if injection is enabled by running following command.

sudo aireplay -ng — test wlan0

Now, bellow are the steps for updating the already installed drivers (if it is the case) to activate those 2 features. Use these commands to get the adapter working on Kali for packet injection and monitoring:

sudo apt update
sudo apt upgrade
sudo apt install bc
sudo apt-get install build-essential 
sudo apt-get install libelf-dev 

sudo apt-get install linux-headers-`uname -r`

sudo apt install dkms
sudo rmmod r8188eu.ko
git clone https://github.com/aircrack-ng/rtl8188eus
cd rtl8188eus
sudo -i
echo "blacklist r8188eu" > "/etc/modprobe.d/realtek.conf"
exit
sudo reboot
sudo apt update
cd rtl8188eus
sudo make
sudo make install
sudo modprobe 8188eu

sudo ifconfig wlan0 down
sudo airmon-ng check kill
sudo iwconfig wlan0 mode monitor
sudo ifconfig wlan0 up
iwconfig                             
sudo aireplay-ng --test wlan0

Solutie

Tip solutie